Linear AE-1000 installation instructions Accessory Overview, Pbus Accessories, Wiegand Accessories

Accessory Overview

EXA-2000

REMOTE

RADIO

AM-RRRANTENNA

REMOTE

RADIO

PBUS Accessories

Several compatible accessories are available to connect to the AE-1000’s three 6-wire communications “PBUS” inputs. Up to six PBUS accessories can be used with each AE-1000 unit.

	AM-RRR Remote Radio Receiver
	For wireless transmitters, connect the Model AM-
	RRR high-gain superheterodyne UHF receiver. The
	receiver is housed in a weather-resistant enclosure
	and can be mounted indoors or outdoors. Gaskets
	and a weather-tight wiring strain relief seal the unit
	from the elements.
AM-RRR	AM-RPR Radio Proximity Receiver

RECEIVER

AE-1000

TELEPHONE ENTRY

&ACCESS CONTROL SYSTEM

AM-RPR

1 2 3

4 5 6

7 8 9

*0 #

AM-KP

The Model AM-RPR functions as a remote device that supplies localized radio reception for the AE-1000 In a typical installation, the AM-RPR would be mounted in a plastic single-gang electrical box next to the controlled opening. When the user requires access, their transmitter must be activated within three inches of the AM-RPR faceplate.

AM-KP Exterior Keypad

The Model AM-KP is housed in a rugged cast aluminum enclosure designed for exterior installations. The die-cast keys have bright, easy-to-read yellow graphics. The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate.

AM-KPI Interior Keypad

PBUS

ACCESSORIES

AM-KPI INTERIOR

WIEGAND

ACCESSORIES

AM-WOR

WIEGAND

AM-KPI

The Model AM-KPI keypad is housed in a rugged, plastic enclosure designed to be mounted indoors in a standard single-gang electrical box. Tamper resistant screws secure the keypad to its mounting plate. The die-cast keys have bright, easy-to-read yellow graphics and is illuminated with white LEDs.The keypad is supplied with a satin-chrome bezel and three interchangeable colored bezels (white, ivory, & bronze) to customize the keypad appearance for the installation.

AM-CRI Card Reader Interface

The Model AM-CRI expands the standard two AE-1000 Wiegand inputs by supporting one or two additional 26-bit Wiegand input devices per

AM-CRIAM-CRI interfaces used.

KEYPAD

*

AM-KP

EXTERIOR

KEYPAD

AM-RPR

RADIO

PROXIMITY

RECEIVER

OUTPUT

RECEIVER

AM-PR

PROXIMITY

READER

AM-CRI

CARD

READER

INTERFACE

Wiegand Accessories

Two Linear accessories are available to connect WIEGAND format devices to the AE-1000. Most other manufacturer’s 26, 30 & 31-bit WIEGAND output devices can also be used with the AE-1000.

	WOR Wiegand Output Radio Receiver
	For block-coded Linear wireless transmitters,
	connect the Model WOR high-gain superheterodyne
	UHF receiver. The receiver is housed in a weather-
	resistant enclosure and can be mounted indoors or
	outdoors. Gaskets and a weather-tight wiring strain
	relief seal the unit from the elements.
WOR	AM-PR Proximity Reader
	The Model AM-PR is a radio-based reader that
	works with either proximity tags (Model AM-PT)
	or proximity cards (Model AM-PC), both of which
	are slotted to attach to key rings. Upon reading a
	user’s tag or card, it transmits the entry data via a
	Wiegand output to the AE-1000. An integral LED
AM-PR	confi rms to the user that access is granted.

4