Link electronic MC-6 Initial Inspection, Unpacking, and Contents, Unpacking the Amplifier

Initial Inspection, Unpacking, and Contents

Initial Inspection

Inspect the shipping container for damage. If the shipping container, packing material, amplifier, or accessories are damaged or missing, notify your dealer and the shipper (if a claim is to be made) immediately. Note: Many shippers require notification and inspection within twenty-four hours of delivery to determine the nature of damages incurred.

Your MC-6 Multi-Channel Power Amplifier has undergone extensive performance evaluations, listening tests, quality control inspections, and a minimum seventy-two hour burn-in period prior to shipment and should therefore be in perfect operating condition upon receipt. If the amplifier does not operate correctly, please notify your dealer immediately.

We strongly suggest that you save all packing materials. If the amplifier is returned to your dealer or Jeff Rowland Design Group, the original packing materials must be used for shipment to avoid damage. Neither Jeff Rowland Design Group nor the shipper can be held responsible for damages incurred during transit if the original factory packing is not used. All factory returns require that Jeff Rowland Design Group issue a Return Authorization (RA) number prior to shipment.

Unpacking the Amplifier

The MC-6 is a large and heavy amplifier. Due caution should be taken when unpacking and installing the amplifier to avoid injury. The amplifier should be unpacked by at least two people, and there should be a portion of carpet or soft, padded cloth to stand the amplifier on when unpacking it from the shipping case.

To unpack the amplifier, stand the shipping case upright and unlock the top cover. Remove the top cover and open the gray liner bag to reveal the handles of the amplifier. Using the handles, the amplifier should be lifted straight out of the case and rested on its rear handles, standing upright. From this position, the MC-6 can be carefully and slowly lowered and set to rest on its feet and moved into its final resting place or installation point.

Contents

Ensure that all of the auxiliary components listed below are enclosed within the accessory box. Refer to the diagrams illustrated above and verify the components included.

1One (1) AC Power Cable

2One set of four (4) Spiked Coupling Supports

3One set of four (4) Compliant Isolation Pads

4One (1) Speaker Terminal Hand Wrench (7/16 inch)

5One (1) Warranty Card (In some countries, warranties are provided by the respective importer.)

5