48
Instant BroadbandTM Series
Follow these instructions to install the TCP/IPProtocol on one of your PCs
only after a network card has been successfully installed inside the PC. These
instructions are for Windows 95 and Windows 98. For TCP/IP setup under
Microsoft Windows NT, please refer to your Microsoft Windows NT manual.
1. Click the Start button. Choose Settings, then Control Panel.
2. Double-click the Networkicon. Your Network window should pop up.
Select the Configuration tab.
3. Click the Add button.
4. Double-click Protocol.
5. Highlight Microsoftunder the list of manuf actures.
Installing the TCP/IP Protocol
EtherFast® Cable/DSL & Voice Router powered by Net2Phone
49
6. Find and double-click TCP/IP in the list to the right (below).
7. After a few seconds you will be brought back to the main Network win-
dow. The TCP/IPProtocol should now be listed.
8. Click OK. Windows may ask for original Windows installation files.
Supply them as needed (i.e.: D:\win98, D:\win95,
c:\windows\options\cabs.)
9. Windows will ask you to restart the PC. Click Yes.
The TCP/IPInstallation is complete.
Twisted-Pair Cabling