Linksys E2100L manual Guest Access, Wireless Printer

Linksys E2100L

3.Enter a name that will be used to identify this device.. Then click Finish..

Name Your Device

Wireless Printer

1.Refer to your printer’s documentation to learn how to connect it to a wireless printer..

2.Enter the Network name (SSID), Security Key, and Security Type settings on your wireless printer.. To print this information, click Print these settings..

Connecting a Wireless Printer

3.Wait until your printer connects.. On the Connecting a wireless printer screen, click Next..

4.Enter a name that will be used to identify this printer.. Then click Finish..

Name Your Printer

Chapter 2: Cisco Connect

Guest Access

The Guest access settings screen appears..

Guest Access Settings

Allow guest access  By default, guest access is enabled.. To disable guest access, select no..

Guest network name  By default, the setup software sets up the name of the guest network..

Password  By default, the setup software sets up the password for the guest network.. To change the password, click Change..

If you clicked Change, the Change guest password screen appears..

Change Guest Password

•• Enter a new guest password  Enter a password of 4-32 characters..

•• Click Change to save your setting..

Total guests allowed  By default, 5 guests are allowed Internet access through the guest network.. Select the appropriate number of guests allowed on your guest network; you can select up to 10 guests..

Click Finish to save your settings..

Advanced Wireless-N Router 8