Linksys E2100L manual Storage Administration, Edit an FTP Folder, Information

Linksys E2100L

7.Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.. Click Close to exit the screen and return to the FTP Server screen..

Edit an FTP Folder

After you clicked Edit, the FTP Folder screen appears..

FTP Folder

Make the appropriate changes to the following options:

Display Name  The current Display Name is shown.. If you want to change the name, enter a new name..

Partition  The name of the partition is displayed..

Share entire Partition  If the FTP folder should include the entire partition, select this option.. If you do not want to share the entire partition, then select the folder you do want to share..

New Folder  If you want to create a new folder, enter its name and then click Create..

Current Folder  The selected folder is displayed.. Folder  The available folders are listed by Folder name..

•• Enter into Folder  To display sub-folders, click this option..

•• Select  To specify a folder, click Select..

•• Return to Upper Folder  To return to the previous folder, click this option..

Access  Specify which user groups have read-and-write or read-only access to the FTP folders.. (To create user groups, refer to Create or Edit a Group Account, page 30..)

Chapter 3: Advanced Configuration

•• Available Groups  To allow a group access to the FTP folder, select it, and then click the >> button..

•• Groups with Access  To block a group from accessing the FTP folder, select it, and then click the << button..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.. Click Close to exit the screen and return to the FTP Server screen..

Storage > Administration

The Administration screen allows you to manage the user groups and individual users who can access the shared folders..

Storage > Administration

Information

Server Name  Enter the server name for the Router; it will be used for the disk and media server features.. Use only alphanumeric characters (letters A to Z and numbers 0 to 9) in the server name.. The default server name of the Router is Ciscoxxxxx (xxxxx are the last five digits of the Router’s serial number)..

NOTE: If you used the setup software for installation, then the name of your wireless network (up to 15 characters) is the server name of the Router..

Workgroup Name  Enter the workgroup name for the Router; it should match the workgroup name of the computers on your local network.. The Router’s default is workgroup..

Server LAN IP Address  The local IP address of the Router is displayed..

Server Internet IP Address  The Internet IP address of the Router is displayed..

Advanced Wireless-N Router 29