Linksys E2100L manual Windows Vista, Access the Mapped Drive, Click Finish

Linksys E2100L Appendix B: How to Install and Access USB Storage

6. Click Finish..

Click Finish

Access the Mapped Drive

1. On your desktop, click the Windows Explorer icon..

Windows Explorer Icon

NOTE: If the Computer icon is not displayed, then go to Start > All Programs > Accessories

>Windows Explorer..

2.Double-click the mapped drive to access it..

Double-Click Mapped Drive

Windows Vista

Install the USB Storage Device

1.Make sure your computer has a wired or wireless connection to the Router..

2.Connect an external USB hard disk drive or USB flash drive to the USB port of the Router..

Internet	4	3	Ethernet	2	1	12VDC
						Power

Access the USB Storage Device

1. On your desktop, double-click the Computer icon..

Computer Icon

NOTE: If the Computer icon is not displayed, then go to Start > All Programs > Accessories

>Windows Explorer..

2.In the Address field, enter the local IP address of the Router:

\\xxx.xxx.xxx.xxx

The default is 192.168.1.1.. You can change this IP address on the Setup > Basic Setup screen; refer to Setup > Basic Setup, page 11..

Enter Local IP Address of Router

Advanced Wireless-N Router 45