Wireless-G PCI Adapter with SRX

If the network has WPA Personal security enabled, then you will see the WPA-Personal Needed for Connection screen. Select the appropriate encryption type, TKIP or AES. Enter the network’s Passphrase or pre-shared key in the Passphrase field. To connect to the network, click Connect. To cancel the connection, click Cancel.

If the network has WPA2 Personal security enabled, then you will see the WPA2-Personal Needed for Connection screen. Enter the network’s Passphrase or pre-shared key in the Passphrase field. To connect to the network, click Connect. To cancel the connection, click Cancel.

Chapter 5: Using the Wireless Network Monitor

Figure 5-7: WPA-Personal Needed for Connection

Figure 5-8: WPA2-Personal Needed for Connection

22

Site Survey

Page 28
Image 28
Linksys WMP54GX manual WPA2-Personal Needed for Connection