Linksys WMP54GX manual WPA-Personal Needed for Connection

Wireless-G PCI Adapter with SRX

WPA-Personal for Connection

WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select one of these methods. Then enter a passphrase.

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.

Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.

WPA2 - Personal Needed for Connection

AES is automatically used as the encryption method. Enter a passphrase on this screen.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.

Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.

2.After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect to Network to connect to your network.

Congratulations! Setup is complete.

To check the link information, search for available wireless networks, or make additional configuration

changes, refer to “Chapter 5: Using the Wireless Network Monitor.”

Chapter 4: Setting Up and Connecting the Wireless-G PCI Adapter with SRX

Figure 4-9: WPA-Personal Needed for Connection

Figure 4-10: WPA2-Personal Needed for Connection

Figure 4-11: Congratulations Screen

10

Setting Up the Adapter