Wireless-G Notebook Adapter with RangeBooster
4.If you chose Infrastructure Mode, go to Step 5 now. If you chose
Select the correct operating channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting.
Click the Next button. Click the Back button to change any settings.
5.If your wireless network doesn’t have wireless security, select Disabled and then click the Next button to continue. Proceed to Step 6.
If your wireless network has wireless security, select the method of security used: WEP,
Proceed to the appropriate section for your security method: WEP,
RADIUS.
WEP
WEP - Select 64-bit or 128-bit encryption
Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. It is case- sensitive and should not be longer than 16 alphanumeric characters. This passphrase must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any
WEP Key - The WEP key you enter must match the WEP key of your wireless network. For
Advanced Users
TX Key - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key
Chapter 4: Setting up and Connecting the
Figure 4-12: Ad-Hoc Mode Settings
Figure 4-13: Wireless Security - WEP
11
Setting up the Adapter
