Linksys WPC54GR manual WPA Personal Needed for Connection

Wireless-G Notebook Adapter with RangeBooster

WEP Key - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Then click Connect and proceed to Step 3.

If your network has the wireless security WPA Personal (Wi-Fi Protected Access) enabled, this screen will appear.

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down menu.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.

Then click Connect and proceed to Step 3.

If your network has the wireless security PSK2 (Pre-shared key 2) enabled, this screen will appear.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.

Then click Connect and proceed to Step 3.

3.After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network, implement the new settings, and return to the Link Information screen.

Congratulations! The profile has been successfully configured.

Chapter 5: Using the Wireless Network Monitor

Figure 5-2: WPA - Personal Needed for Connection

Figure 5-3: PSK2 Needed for Connection

Figure 5-4: Congratulations

22

Create a New Profile