Wireless-G Notebook Adapter with RangeBooster

If your network has the wireless security PSK2 (Pre-shared key 2) enabled, this screen will appear.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.

Then click Connect and proceed to Step 3.

Figure 4-7: PSK2 Needed for Connection

3.After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network. For more information about the Wireless Network Monitor, refer to Chapter 5: Using the Wireless Network Monitor.

Congratulations! The installation of the Wireless-G Notebook Adapter is complete.

To check the link information, search for available wireless networks, or make additional configuration

changes, proceed to Chapter 5: Using the Wireless Network Monitor.

Figure 4-8: Congratulations

Chapter 4: Setting up and Connecting the Wireless-G Notebook Adapter

9

Setting up the Adapter

Page 15
Image 15
Linksys WPC54GR manual Congratulations