Linksys WPC54GX manual Setting up the Wireless-G Notebook Adapter with SRX, Overview

Wireless-G Notebook Adapter with SRX

Chapter 4: Setting up the Wireless-G Notebook Adapter with SRX

Overview

The Wireless-G Notebook Adapter Setup Wizard will guide you through the installation procedure. The Setup

Wizard will install the Wireless Network Monitor and driver, as well as configure the Adapter.

NOTE: You must run the Setup Wizard to install the software before installing the hardware.

Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM drive).

On the Welcome screen, you have the following choices:

Click Here to Start - Click the Click Here to Start button to begin the software installation process.

User Guide - Click the User Guide button to open the PDF file of this User Guide.

Exit - Click the Exit button to exit the Setup Wizard.

Running the Setup Wizard

1. To install the Adapter, click the Click Here to Start button on the Welcome screen.

Figure 4-1: The Setup Wizard’s Welcome Screen

Chapter 4: Setting up the Wireless-G Notebook Adapter with SRX 6

Running the Setup Wizard