Chapter 1

Product Overview

Security Bracket  The security bracket labeled “Reset” clips onto the Router. It covers the Reset button and the security slot on the Router’s top panel. You can remove the security bracket to access the Reset button.

Reset  There are two ways to reset the Router’s factory defaults. Either press and hold the Reset button for approximately five seconds, or restore the defaults from the Administration > Factory Defaults screen of the Router’s web-based utility.

Power  The Power port is where you will connect the power adapter.

Front Panel

Security Slot  To protect the Router from theft, you can attach a lock to the Router using the security slot.

Bottom Panel

To place the Router in a vertical position, rotate the stand 90 degrees.

Placement Positions

There are three ways to physically install the Router. The first way is to place the Router horizontally on a surface. The second way is to stand the Router vertically on a surface. The third way is to mount the Router on a wall.

Horizontal Placement

The Router has four rubber feet on its bottom panel. Place the Router on a level surface near an electrical outlet.

Vertical Placement

The Router has a stand on the panel opposite to the antenna. Rotate the stand 90 degrees, and place the Router on a level surface near an electrical outlet.

Wireless-G Router for Mobile Broadband



Page 6
Image 6
Linksys WRT54G3GV2-ST manual Front Panel, Bottom Panel, Placement Positions, Horizontal Placement, Vertical Placement