English Setup
Setup
Connecting
The first stage in setting up your EXOTIK is to connect your sources, power amp(s) and other peripheral devices to the EXOTIK.
1.Ensure your EXOTIK and all components that you will be connecting to the EXOTIK are disconnected from the mains supply.
2.Connect your source components, power amp(s) and any communication/control devices you wish to use, referring to the back panel diagram in the Connecting chapter (page 3).
3.Connect the EXOTIK to the mains supply and turn the unit on using the switch on the back panel. After a few seconds the front panel will display EXOTIK or EXOTIK+DA depending on your unit.
4.Press the 
key on the front panel or handset.
The main stage in setup is configuring the EXOTIK
Using the EXOTIK with a Linn UNIDISK player
For information on how to connect and set up your EXOTIK to a Linn UNIDISK player, see page 16.
EXOTIK
Setup menus
The setup menus enable you to configure your EXOTIK for all sources it is connected to, the loudspeakers in your system and much more. To take advantage of your EXOTIK’s features, please take the time to configure your unit correctly.
The setup menus are divided into five categories and are accessed via the MAIN MENU:
SPEAKER SETUP
For configuring the unit for the number and size of the loudspeakers in your system and for calibrating their volume level. (EXOTIK+DA: also for setting the distance of your loudspeakers from your listening position.)
SOURCE SETUP
For configuring sources on the unit.
AUDIO SETUP
For configuring the audio output of the unit.
GENERAL SETUP
For adjusting the general setup of the unit.
UNIDISK SOURCE
For adjusting the input settings if you are using a Linn UNIDISK player with the EXOTIK.
There is also a UNIDISK SETUP item in the MAIN MENU for accessing the setup menus on a Linn UNIDISK player if one is present (see Using the EXOTIK with a Linn UNIDISK player, page 16).
In addition, the EXOTIK features an INSTALLER MENU for saving the configuration of the unit as set in the above menus and restoring the factory defaults. For full information see Installer menu, page 15.
Owner’s Manual | 6 |
