English Operation
Lip Sync Delay (EXOTIK+DA)
You may find with certain
To adjust Lip Sync Delay:
●Press LIP SYNC on the handset.
●Press / to increase/decrease the delay of the audio signal until the picture and audio are synchronized.
Lip Sync Delay range is from 0 to 250 milliseconds.
Note:
Lip Sync Delay can only be applied to digital sources and is not available for DTS audio signals.
Surround sound formats
The EXOTIK+DA is equipped with a wide range of surround sound formats to enhance your audio/home cinema experience. The only surround sound format available on the standard EXOTIK is Stereo Sub.
To change the surround sound format:
●Repeatedly press SURR on the handset until the desired format is shown on the front panel display.
EXOTIK
The available surround sound formats, and a brief description of each, is as follows:
Surround sound format | Description |
|
|
Dolby Digital | A standard for storing 5.1 channels of audio signal |
| on to discs such as |
|
|
Dolby Digital EX | Spreads the surround speaker portion of a Dolby |
| Digital 5.1 audio signal to two back speakers - |
| converting 5.1 audio to 7.1 audio |
|
|
Dolby Pro Logic II | Converts any |
| surround sound 5.0 signal |
|
|
Dolby Pro Logic II Music | Same as Dolby Pro Logic II but is particularly suited |
| to music. Features three |
| that are accessed via the setup menus |
|
|
DTS Digital Surround | A standard for storing 5.1 channels of audio signal on |
| to discs such as |
|
|
DTS 96/24 | Same as DTS Digital Surround but offers better audio |
| quality |
|
|
DTS ES Matrix | Spreads the surround speaker portion of a DTS 5.1 |
| audio signal to two back speakers - converting 5.1 |
| audio to 7.1 audio |
|
|
DTS ES Discrete | A standard for storing 6.1 channels of audio signal |
| on to discs such as |
| extra channel can be spread over two back speakers - |
| converting 6.1 audio to 7.1 audio |
|
|
DTS 96/24 ES Matrix | Higher quality of DTS Digital Surround with the |
| addition of the surround sound speaker portion of |
| the signal being spread to two back speakers - |
| converting 5.1 audio to 7.1 audio |
|
|
Phantom | Passes the centre channel portion of a 5.1 or 7.1 |
| audio signal to the front left and right speakers |
|
|
3 Stereo | Downmixes a 5.1 or 7.1 audio signal and passes it to |
| the front left and right, and centre speakers only |
cont.
Owner’s Manual | 18 |