ENGLISH
Station scanning
This function is the same as Station searching (page 9) but searching continues automatically five seconds after a station is found.
To scan for stations:
•Press SCAN on the handset. (If SCAN is not shown on the display, press and hold SCAN.)
•To scan upwards/downwards through the band, press 
or 
.
The tuner will pause for five seconds on the next station it finds. To skip the pause, press 
or .
• When you reach the desired station, press 
.
Station searching/scanning by Programme Type (FM band only)
This function allows you to find FM stations which use RDS, by the type of programme being broadcast, e.g. Pop Music, Jazz Music, News (see About RDS, page 9).
To search or scan for stations by Programme Type:
•Repeatedly press and hold SCAN on the handset to choose either station SEARCH or SCAN (see Station searching and Station scanning, above).
•Turn on the Programme Type function by pressing 
or 
. Arrows will appear on the display on either side of the currently shown Programme Type.
•Repeatedly press 
or 
. The various programme types will cycle on the display.
•When your chosen type is shown, press 
or 
to search or scan upwards/downwards for stations of that type.
To turn the Programme Type function off:
•Press 
. The arrows on either side of the Programme Type will disappear.
Note:
If no station of a particular type is available after all stations have been checked, the AKURATE Tuner will return to the last station selected.
Frequency selection
To tune to a radio station by selecting a specific frequency:
•Press TUNE on the handset. TUNE is shown on the display.
•To increase the received frequency, repeatedly press or hold 
.
•To decrease the received frequency, repeatedly press or hold 
.
or
•Enter a frequency using the digit keys.
As you enter a frequency it is automatically adjusted to ensure it is valid. To remove an incorrect digit, press 
.
