ENGLISH
Manual preset storage/Renaming stations
To manually store a station as a preset, or rename a station that is already stored:
1.Set the AKURATE Tuner to the station you wish to store or rename.
2.Press STORE on the handset.
The display shows STORE PRESET, the station’s name or frequency and a flashing cursor:
3.You are able to give each preset a name of up to 10 characters.
Enter a name using the following handset keys –
/ | Cycle through |
| symbols. |
Switches between capital and
digit keys Can be used to quickly access numbers and
•When you have selected the desired character, press to move to the next space.
•To change or delete a character use the / keys until the character flashes, then enter the new character, or press and hold to delete it.
•To insert a character use the / keys to reach the position at which you wish to insert the new character. Press and hold . The flashing character and all others that follow it move one space to the right. Add the new character.
4.When you have finished entering the name for the preset, press
STORE.
Notes:
If you try and store a station with a name that is already in use for a preset, you will be prompted to change the name.
If you change the name of a station it is the new name that will be displayed when you search, scan or tune to that station.
16AKURATE TUNER
Selecting a preset
To select a preset:
using the handset –
• Press PRESET.
PRESET is shown on the display.
• Repeatedly press or hold / .
or
•Press / to select the first/last preset stored under each letter of the alphabet.
using the front panel –
•Press or hold PRESET + to cycle numerically then alphabetically through the presets.
•Press or hold PRESET - to reverse the order.
Note:
Presets for all bands are stored together by number or letter (i.e. a DAB preset may be next to an FM preset).
Favourite presets
For quick access to your favourite stations you are able to assign up to 10 presets to the 0 – 9 digit keys.
To assign a preset to a digit key:
•Select the preset you wish to assign (see Selecting a preset, above).
•Press and hold the digit key you wish to use until PRESET ASSIGNED is displayed.
Note:
If you wish to change the preset that is assigned to a digit key, follow the steps above. The new preset will overwrite the current one.