Unit Configuration
Option | Description | Settings |
|
|
|
Handset | If set to ‘Yes’, unit will respond to | Yes |
Commands | commands received via the IR | No |
Accepted | receiver on the front panel. |
|
|
|
|
Remote In to | If set to ‘Yes’, passes RC5 | Yes |
Remote Out | commands received at REMOTE | No |
| IN to REMOTE OUT. |
|
|
|
|
IR to Remote | If set to ‘Yes’, passes commands | Yes |
Out | received via the IR receiver on the | No |
| front panel to REMOTE OUT. Will |
|
| function even if ‘Handset |
|
| Commands Accepted’ is set to ‘No’. |
|
|
|
|
Baud Rate | Sets the baud rate for RS232 | 9600 |
| control. | 4800 to 230400 |
|
| (9 settings) |
|
|
|
RS232 Start | If set to ‘Yes’, will output an | Yes |
Message | RS232 start message when the | No |
| unit is switched on. |
|
|
|
|
RS232 Events | If set to ‘Yes’, a message will be | Yes |
| sent via the RS232 IN socket | No |
| whenever a change in the unit’s |
|
| status occurs (e.g. if the station is |
|
| changed). |
|
|
|
|
FM Tuning | If a cable feed is being used and | Narrow |
Bandwidth | the AKURATE Tuner has difficulties | Medium |
| tuning to certain stations, it may be | Wide |
| because these stations are being |
|
| transmitted with a slight offset. Set |
|
| this option to Medium or Wide |
|
| (depending on what setting |
|
| provides the best results). |
|
|
|
|
Option | Description | Settings |
|
|
|
DAB Digital | If set to ‘On’, the DAB audio | On |
Output | signal will be sent to the DAB | Off |
| digital outputs as well as to the |
|
| analogue outputs. |
|
| If set to ‘Off’, the DAB audio |
|
| signal will only be sent to the |
|
| analogue outputs. |
|
|
|
|
Reset Defaults | Resets all options to their factory | - |
| default settings. |
|
|
|
|
Rescan DAB | If UK Services, followed by Scan | UK Services |
Stations | is selected, the unit will scan | All Services |
| Band III frequencies (used by all |
|
| UK stations). |
|
| If All Services, followed by Scan |
|
| is selected, the unit will scan all |
|
| DAB frequencies (Band III and L |
|
| Band). |
|
|
|
|
Unit Information | Allows the following details about | - |
| the unit’s functional specifications |
|
| to be viewed. This category is |
|
| mainly intended for Linn |
|
| personnel and |
|
| service agents. Selecting each |
|
| heading will display the relevant |
|
| data. |
|
| Please note – no adjustment is |
|
| possible in the ‘Unit Information’ |
|
| category. |
|
| • H8 S/W Version – shows the |
|
| revision of the H8 software. |
|
| • RDS S/W Version – shows the |
|
| revision of the RDS software |
|
|
|
|
ENGLISH
AKURATE TUNER 19
