8
Replacing the fuses
Before replacing the fuse identify the correct fuse for your local voltage:
•100V: T800mA
•115V: T800mA
•230V: T800mA
The fuse compartment is on the mains inlet module to the left of the voltage selector.
Disconnect the mains supply by removing the IEC mains cable from the mains inlet module. Using a flat blade screwdriver remove and replace the fuse. If the fuse blows a second time there is a fault in the product. Contact your local retailer.
Earthing.
This product must be earthed, Use the three wire moulded mains lead supplied. Never use an unearthed plug or adaptor.
