Linn UNIDISK SC PLAYER owner manual Back panel Phono version

English Connecting

Back panel - Phono version

1Mains input

2Power switch

3IR OUT 1 and 2 Infrared flasher connectors. Allow the control via the handset of auxiliary devices that accept infrared signals.

4RS232 IN and OUT For operating the unit via a PC or touch-screen device.

5REMOTE IN and OUT For installing the unit in a KNEKT system.

6S-VIDEO OUT For connection to a display device that accepts an S-video signal.

7S-VIDEO IN For connection to a VCR with an S-video output.

8YPrPb IN and OUT Component video inputs and outputs.

9CVBS IN and OUT Composite video input and output.

10MAIN RX TX Indicate signals being transmitted between products in a KNEKT system.

11ACC Accessory socket. For installing the UNIDISK SC in a KNEKT system or for connection to an infrared repeater.

12MAIN IN, ROOM 1-4For linking products in a KNEKT system.

13ROOM RX TX Indicate signals being transmitted between products in a KNEKT system.

UNIDISK SC PLAYER

14Line output connectors Line outputs for connection to a power amplifier and subwoofer.

15TV OUT Line (fixed) level for connection to a display device with volume controls or to an external pre-amplifier.

16AUX 1 and 2 Analogue inputs for auxiliary sources.

17R IN TV, L IN TV For connection to a television’s audio outputs.

18R IN VCR, L IN VCR For connection to a VCR’s audio outputs.

19DIGITAL IN 1-4Two SPDIF (electrical) and two TOSLINK (optical) digital inputs for auxiliary sources.

20DIGITAL OUT SPDIF and TOSLINK For connection to devices with digital inputs.

Note:

Audio signals from Super Audio CDs and DVD-Audio discs are output as analogue only. There is no output for these disc types from the digital connectors.

Before connecting or disconnecting any of the plugs on the back panel, the UNIDISK SC should be disconnected from the power supply. If this is not done you may generate surges which could damage the UNIDISK SC or other components in your AV system.

Owner’s Manual 4