LivinBox Storage Products Co 21, 18, 19, 25, 24 To Use the Dispenser, If This is Your First Icemaker

To Use the Dispenser

Set the selector switch to ICE CUBES or CRUSHED ICE.

Press the rim of the glass gently but firmly against the rubber- cushioned cradle.

To stop dispensing, release pressure from the cradle and hold the glass under the chute to catch the last bits of ice or droplets of water.

After crushed ice is dispensed, some water may drip from the chute.

Do not pour water in the spill shelf because it is not self-draining. Pour it in kitchen sink. Any large amount of water should be wiped dry right away. The shelf and its grille should be cleaned regularly.

Spill shelf

If This is Your First Icemaker

Some crushed ice may be dispensed even though you selected CUBES. This happens occasionally when a few cubes accidentally get directed to the crusher.

Sometimes a mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

Sometimes crushed ice will spray beyond the glass. To avoid this, hold the glass up close to the chute.

If Ice Clumps Form in the Storage Bin

When ice is not used frequently ice clumps may form in the storage bin, which may jam the motor-powered auger which moves the ice through the chute. If this happens:

•remove the storage bin from the freezer compartment

•break up ice clumps with fingertip pressure and discard remaining clumps

•replace the bin before remaining cubes melt and fuse together

Important Facts About Your Dispenser

•Avoid overfilling glass with ice and use of narrow or extra-tall glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. Periodically open the freezer compartment door and look down into the chute. If ice is blocking the chute, poke it through with a wooden spoon.

•To help keep bits of ice from being sprayed beyond the glass, place glass close to ice chute—but not so close that it blocks outcoming ice.

•Ice should not be dispensed into thin glasses, fine china or delicate crystal—they can crack or chip from the combined pressure of your hand pressing them against the cradle and ice dropping into them.

•Add ice before filling the glass with a beverage. This will prevent splashing, which is annoying and which, if the splash reaches the ice selector switch, could cause it to stick or bind.

•Beverages and foods should not be quick-chilled in the ice storage bin. Cans, bottles or food packages in the storage bin may cause the icemaker or auger to jam.

•Do not add ice from trays or bags to the storage bin. It may not crush or dispense well.

Features vary by model

13