![](/images/new-backgrounds/1026089/2608989x1.webp)
Outdoor Knight Boiler Installation & Operation Manual
8 Operating information (continued)
Outdoor Knight boiler control module
Use the control panel (FIG.
Figure 8-1 Control Panel
NAVIGATION DIAL (PRESS OR TURN)
The information on the bottom of the display shows the functions of the two SELECT keys (on either corner), and the NAVIGATION dial (in the center):
MENU = Left SELECT Key
SETPOINTS = NAVIGATION Dial - Pressing Down
SHDN = Right SELECT Key
Access modes
User
The user can adjust space heating and tank target temperatures by pressing the NAVIGATION dial when “SETPOINTS” is flashing at the bottom of the display. The date and time, and the temperature units can also be changed (see page 38).
Installer
Most parameters are available only to the installer, accessible by entering the installer password, see the Outdoor Knight Boiler Service Manual.
Saving parameters (reference the Parameter Table in the Outdoor Knight Boiler Service Manual)
NOTICE | Please note that the brackets ([]) denote |
| screen status. |
|
To save parameters and exit programming:
Press the RIGHT SELECT [SAVE] key and then press the RIGHT SELECT [HOME] key.
To enter a parameter and continue programming:
Press the RIGHT SELECT [SAVE] key 1 time to return to the parameter listings; press again to return to the menu listings. Remember to press the RIGHT SELECT [HOME] key when finished programming in order to save the changes made.
See the Outdoor Knight Boiler Service Manual for a detailed description of parameters and access modes.
45