Figure 6-5Parameter Set 2E

6Parameters (continued)

Figure 6-5Parameter Set 2E

Parameter 2EB sets the pump delay time for the boiler pump after an over-temperature condition. This time is adjustable from 0 minutes to 40 minutes. The default time is 2 minutes.

If the boiler pump or HW pump have not been active in a 24 hour period, the SMART TOUCH will activate the appropriate pump for a programmed time to prevent jamming. The boiler pump time can be changed by accessing parameter 2EC. This time is adjustable from 0 minutes to 40 minutes. The default time is 20 seconds. The HW pump time can be changed by accessing parameter 2ED. This time is adjustable from 0 minutes to 40 minutes. The default time is 20 seconds.

Set 4: Menu values

Set 4 contains parameters that can be accessed from the boiler display. The parameters in this set control the basic operation of the boiler. To access these parameters, click on Parameters at the top of the Main Screen window (FIG. 6-1, page 10), then click on Set 4: Menu Values on the pull-down menu (FIG. 6-6).

PC Program Instructions

Figure 6-6Parameter Set 4A

Space Heating (SH) user setpoint (User Setp)

The SH User Setpoint sets the water temperature setpoint for fixed operation or the maximum temperature setpoint when the outdoor air sensor is used. This parameter can be changed by accessing parameter 4AA. The temperature range of this parameter is 50°F to 190°F. The default value is 125°F.

SH min user setpoint (Min User Setp)

The SH Minimum User Setpoint sets the minimum water temperature setpoint that can be used for space heating operation. The user or installer will not be able to program the control with a lower SH setpoint. This parameter can be changed by accessing parameter 4AB. The temperature range of this parameter is 0°F to 190°F. The default value is 70°F.

SH max user setpoint (Max User Setp)

The SH Maximum User Setpoint sets the maximum water temperature setpoint that can be used for space heating. The user or installer will not be able to program the control with a higher SH setpoint. This parameter can be changed by accessing parameter 4AC. The temperature range of this parameter is 0°F to 190°F. The default value is 190°F.

SH turn-off differential (SH off df)

The SH Turn-off Differential sets how many degrees above the Max. Cascade setpoint (parameter 4AY) the outlet temperature has to go before the boiler will shut off. This parameter can be changed by accessing parameter 4AD. The temperature range of this parameter is 0°F to 86°F. The default value is 10°F.

Set 4: Menu values 13 Figure 6-6Parameter Set 4A

Page 12 Page 14
Page 13
Image 13
Lochinvar 1.3, 1.5 Set 4 Menu values, 5 Parameter Set 2E, 6 Parameter Set 4A, Space Heating SH user setpoint User Setp
Page 12 Page 14

1.5, 1.3, 1 specifications

Lochinvar 1 is a remarkable achievement in the realm of modern technology and engineering. As a powerful and efficient water heater, it has been designed to cater to a wide range of residential and commercial needs. One of the standout features of Lochinvar 1 is its advanced heating technology, which incorporates a high-efficiency condensing design. This technology allows the unit to achieve impressive energy savings by maximizing heat transfer while minimizing energy consumption.

The Lochinvar 1 utilizes a stainless steel heat exchanger that enhances durability and corrosion resistance. This not only extends the lifespan of the unit but also ensures consistent performance over time. Coupled with a user-friendly control system, users can easily adjust settings and monitor performance, enhancing overall convenience and usability.

Another key characteristic of the Lochinvar 1 is its compact design, making it suitable for a variety of installation environments. Whether in a residential basement or a commercial utility room, the unit’s space-saving configuration allows for efficient use of available area without compromising on capability.

Safety features are integral to the Lochinvar 1, providing peace of mind for users. The unit is equipped with advanced monitoring systems that can detect irregularities and automatically shut down the system if necessary. This not only protects the equipment but also enhances the safety of the environment in which it operates.

In terms of performance, Lochinvar 1 boasts a high recovery rate, ensuring hot water is available on demand. This is particularly beneficial for settings with high water usage, allowing simultaneous operations without lag.

Moreover, the unit supports various venting options, offering flexibility during installation. Whether using traditional vertical venting or innovations like direct venting, Lochinvar 1 accommodates different building designs and local codes, making it highly versatile.

In conclusion, Lochinvar 1 epitomizes the melding of efficiency, reliability, and user-friendly technology. With its high-performance features, robust safety systems, and adaptable installation options, it stands out as a forefront player in the water heating industry, meeting the diverse needs of today's consumers and businesses alike.
Top Page Image Contents