Manuals / Lochinvar / Household Appliance / Water Heater

Lochinvar 1.3 operation manual Models, SYNC - PCP Rev A, Save this manual for future reference

Models: 1.5 1.3 1

1 20

Download 20 pages 6.19 Kb

Page 1

Image 1

SYNC - PCP Rev A

PC PROGRAM INSTRUCTIONS

FOR THE SYNC

Models: 1.0 -- 1.3 -- 1.5

WARNING

This manual must only be used by a qualified heating installer / service technician. Read all instructions, including this manual, the SYNC Installation and Operation Manual, and the SYNC Service Manual, before installing. Perform steps in the order given. Failure to comply could result in severe personal injury, death, or substantial property damage.

Save this manual for future reference.

Page 1

Image 1

Lochinvar 1.3, 1.5 operation manual Models, SYNC - PCP Rev A, Save this manual for future reference

Contents

SYNC - PCP Rev A ModelsSave this manual for future reference PC PROGRAM INSTRUCTIONS FOR THE SYNCContents Program installation 1InstallationUSB installation Program setupStarting the program Figure 1-3 Password WindowFigure 1-1 SMART TOUCH PC Main Screen Figure 1-2 Sitecs937Lab Main ScreenFigure 2-1 SMART TOUCH Status Screen 2Status ScreenPC Program Instructions 2Status Screen Figure 2-1 continuedPC Program Instructions Figure 3-1 SMART TOUCH Graphics Screen 3Graphics ScreenPC Program Instructions Figure 4-1 Fault History Screen 4Fault History ScreenPC Program Instructions Figure 5-1 Cascade Screen 5Cascade ScreenPC Program Instructions 6Parameters Set 1 System Setup Set 2 Functional DataParameter information screens Set 4 Menu ValuesRamp delay settings Set 1 System setupFigure 6-3 Ramp Delay Interval 6Parameters continuedBlock time switching boiler on/off Block time switching boiler onBlock time Switch On/Off 2nd burner HW Set 2 Functional DataFigure 6-5 Parameter Set 2E Set 4 Menu valuesFigure 6-6 Parameter Set 4A Space Heating SH user setpoint User SetpNight setback temperature NSB Setp Shift OA reset curve Shift Air ResetMax service time Max Serv t SH off-ondifferential SH off/on dfCascade max SH step power based Max outl temp Time to switch between HW and SH SH/HW sw timConfig SH control Tank differential tempHW pump delay HW Pump D SH pump delay after SH demand Boiler Pump DSystem pump delay Sys Pump D CascadeRunning hours for service reminder Serv NotRun h No. of months for service reminder Serv Not timeBurner cycles for service reminder Serv Not cycl Ramp delay Ramp delayBMS Power at min voltage BMS mod @minV Figure 6-11 Outdoor Air Reset CurveBMS Power at max voltage BMS mod @maxV Figure 6-12 Parameter Set 4GBMS Voltage at max power BMS V @max mod BMS Voltage at min power BMS V @min modBMS Demand Enable 1 Voltage Storing parameters on your PCRevision Notes Revision A initial release