Lochinvar 1.3, 1.5 Starting the program, 1 SMART TOUCH PC Main Screen, 2 Sitecs937Lab Main Screen

PC Program Instructions

1Installation

Figure 1-1SMART TOUCH PC Main Screen

Figure 1-2Sitecs937Lab Main Screen

Starting the program

To start one of the programs, double-click on the icon (if you put it on your desktop), or click on Start, then Programs, and select the program you wish to start. See FIG 1-1 and FIG 1-2 above.

There are two access levels for this program. The user access level allows only certain settings to be changed. The installer access level allows more settings to be changed. The program defaults to the user level when started. You will notice that a lock symbol appears in the lower right-hand corner of the window. To move to the installer level, a password must be entered. This password is located on a label on the CD-ROM case. You may enter the password by clicking on the “key” button in the upper left-hand corner of the window. A window opens in which you can type in the password (see FIG. 1-3). Note that the password is case sensitive and is in all CAPS. Click on the Ok button, or press the Enter key. You will notice that the lock symbol at the lower right-hand corner of the window has changed into a key symbol.

There are some fields along the bottom of the window (FIG. 1-1): The left field shows the location of the program. The next field shows the status of the communication between the PC and the SMART TOUCH. This will say “No connection” when the program is started. As soon as the program sends or receives data from the SMART TOUCH, this field will show “Connected”. The right field shows the filename of the parameter file in the program’s memory (see parameters in Section 6).

Figure 1-3Password Window

4