Operating additional equipment
If you want to set up or change a speaker system:
34Select Configuration/modification,
OK call selection.
Sound components wizard
Please specify here whether you want to completely reconfigure a speakers system or whether you want to limit the configuration to changing the speaker connections, the speaker distances from the listening position or the individual speaker levels in relation to each other.
Sound components
Configuration/modification of speaker system
Complete | OK |
Connections only | END |
Distances only | |
Levels only |
|
OK Proceed |
|
Select Complete,
OK continue to connect and set the front speakers.
➠Select the start value of the frequency response of the speakers for the right setting (e.g. 50Hz for the specification "Frequency response
➠You can replace the external front speakers by the TV speakers if necessary. In this case, select TV speakers. Then transmit the sound of the front speakers.
OK continue to connect and set the surround speakers.
34Select yes for external speakers.
➠If no surround speakers are connected, these can be simulated using the front and centre speakers.
Go to the menu line below and
34set the lower limit frequency of the surround speakers in 10 Hz steps.
➠ Select the start value of the frequency response of the |
Sound components wizard
Please specify here whether you want to connect external front speakers. In this case, their lower limit frequency must be entered in Hz (see instruction manual and technical data of the speakers).
Sound components Connect front speakers
peakers External speakers 40 Hz 
OK Proceed
40Hz40Hz
TV spe
END
speakers for the right setting. |
OK continue to connect and set the centre speaker.
34Select whether the TV speakers or an External speaker is to reproduce the centre sound or no if no centre speaker is connected.
➠If no centre speaker is connected, the front speakers also transmit the centre sound parts additionally.
for External speakers or TV speakers go to the menu line below and
34Select External speakers,
go to the menu line below and
34set the lower limit frequency of the front speakers in 10 Hz steps.
Sound components wizard
Please specify here whether you want to connect
external front speakers. In this case, their lower 70Hz70Hz limit frequency must be entered in Hz (see
instruction manual and technical data of the speakers).
Sound components Connect front speakers External speakers
70 Hz
OK Proceed | END |
34set the lower limit frequency of the centre speaker in 10 Hz steps.
➠Select the start value of the frequency response of the speakers for the right setting.
OK continue to connect the Subwoofer.
34yes is the selection for subwoofer.
➠If no subwoofer is connected, the front speakers additionally transmit the sound parts intended for the subwoofer as far as possible.
continued on the next page
- 50
