Loewe 52 OK continue to set, Distance to left front speaker, OK continue to Adjust speaker level

Operating additional equipment

OK continue to set the

Distance to left front speaker.

➠Measure the distances from your listening position to the front, surround, and centre speakers respectively. The Dolby Digital Decoder calculates the delay times for the speaker signals from these so that they reach the listener simultaneously.

Sound components wizard
Please enter the distance of the left front
speaker from your listening position here.	4,2m	2,7m	4,0m
	1,0m		0,9m
Sound components
Distance to left front speaker				END
4,2 m
OK Proceed

34Set the distance between the left front speaker

and your listening position in 10 cm steps.

OK continue respectively to the other speakers and

34adjust the distance.

➠After setting the distance for the centre speaker ...

OK continue to Adjust speaker level.

Sound components wizard
You hear a sound from every speaker one after
another. But you can also select the speakers			0dB	0dB
manually with the menu control buttons up/down.
Set the volume for the respectively active speaker
shown in blue so that you get approximately the			0dB	0dB
same volume impression from all the speakers.
	Sound components
	Adjust speaker level			END
	0 dB	Preceding/next loudspeaker
	OK Proceed

34Adjust the volume for each speaker. Select speakers manually.

➠For balanced audio reproduction all speakers should be set at the same volume level. A noise signal will be reproduced automatically on each speaker in succession. Adjust every speaker to equal perceived volume from your listening position.

OK continue to Subwoofer phase.

Sound components wizard

Here you can reverse the phase of your subwoofer. Test both values in music reproduction and then select the one with which you get a better bass reproduction.

Sound components
Subwoofer phase
0°	180°
OK Proceed	END

Switch to a station with music with P+/P– or start playback with music on a DVD player.

34Test both values (0º and 180º) and select the one with which you get a clearer bass reproduction from your listening position.

OK to confirm the setting and exit the wizard.

This ends the sound components wizard for connecting and setting up a speakers system.

51 -