Loewe A 37 HD+ 100, A 37 Full-HD+ 100 manual Button functions

Daily operation

Button functions

Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer and DR archive, if equipped with Digital Recorder) has its own menu and own functions for the coloured buttons. The function of the coloured buttons is shown at the bottom of the menus and wizards. Below, some of the function are listed which you need in TV mode for the daily handling of your TV set.

Functions of the coloured buttons in TV mode

➠The coloured buttons do not work as described below for TV sets with MHEG-5 software, but they operate as described on page 33 (Digital Teletext).

Red button: Freeze on/off.

In sets with Digital Recorder: DR archive on/off.

For TV sets with MHEG-5 software you can open the DR archive via the menu Assist+ (see page 16).

Green button: Open the Teletext functions menu.

Teletext functions			INFO END
Teletext subtitles		Personal text pages
on, with normal size	...

Select Teletext subtitles or Personal text pages. Go to the menu line below in Teletext subtitles.

Select the size of the Teletext subtitles,

OK show Teletext subtitles.

(display only if subtitles are available). END: Teletext subtitles off or select off in menu.

OK in Personal text pages calls the teletext pages or

the teletext page directly if only one page is noted (for defining pages, see page 33).

Yellow button: Go to the last viewed station.

Use this button to quickly switch back and forth between two stations. For MHEG-5 see page 18 or on this page at the right lower column.

Blue button: Show programme info.

For MHEG-5, no programme info is available.

1 ARD

14:30 - 15.15 Urlaubsparadies Toskana

Programme info	14:43	END
Detailed info	OK	Detailed info (teletext) Programme preview

Permanent display of time

Press twice in rapid succession: Time is displayed permanently.

14:42

K or END: Hide time.

- 22

Selecting the picture format

Press the Picture format button until the desired picture format is set or press

to select the desired picture format.

The Panorama picture format can be set between proportionally correct and format filling display. Black bars are visible on the left and right of the picture in the prportionally correct display.

Switch: Keep the M button on the TV pressed, at the same time, press the Picture format button on the remote control briefly.

Reset: Press the same button combination again.

Explanations of the picture formats:

	➠ The setting options depend on the transmitted picture
	content.
16:9 Proportionally correct display of 16:9 broadcasts.
4:3	Proportionally correct display of 4:3 broadcasts.
Panorama	Proportionally correct or format filling display (as-delivered
	state) of 4:3 broadcasts on the 16:9 screen. Station logo
	and subtitles remain visible.
	See above for switching the Panorama mode.
Cinema	Proportionally correct, format filling display of 4:3 broad-
	casts on 16:9 screens. Station logo and subtitles usually
	not visible.
Zoom	Proportionally correct display. Maximum picture magni-
	fication.
PALplus	Is a 4:3-compatible 16:9 picture broadcast supplied by
	the station which is detected automatically.

If a high resolution video signal is displayed on the TV set or fed in via the interfaces PC IN, HDMI1/DVI, HDMI2/DVI oder COMP. IN, the picture formats 16:9 TV, 4:3 TV, 16:9 PC and 4:3 PC can be set.

Move picture vertically

➠In normal TV mode without other displays.

Move picture up/down.

To show subtitles or news tickers which have been cut off, the picture can be moved up or down in the picture formats Panorama, Cinema and Zoom (not with high

resolution signal) with the arrow buttons .

➠For TV sets with MHEG-5 software you can switch back and forth quickly between two stations using these buttons (see also on page 18).

33156_024_Xelos_A32_42_GB_9_00_B22 22

03.07.2008 15:37:23