![](/images/new-backgrounds/1126058/126058113x1.webp)
Troubleshooting
Problem | Possible cause | Remedy |
|
|
|
All menus are displayed in the wrong language. | The menu language was set incorrectly. | Set the menu language: |
|
| Press the INFO button in TV mode (Index). |
|
| Mark the first key word and call it with OK. |
|
| Then select the language and confirm it with |
|
| OK. |
|
|
|
In the TV menu, Connections cannot be called | A timer recording is in progress. | Wait until the timer recording ends or delete |
(displayed in grey). |
| the timer recording (page 51). |
|
|
|
The control functions of the Loewe Recorder | a) The Digital Link function is not activated or | a) Activate Digital Link in the recorder (see |
and the Timer are not working or are not | not possible in the recorder. | operating instructions of the recorder). |
working properly | b) | b) Connect |
| ||
| c) Recorder is not logged in. | c) Register recorder (page 40). |
|
|
|
General problems when connecting external | a) The device is not logged in to the connection | a) In the connection wizard (TV menu → |
devices via an AV input. | wizard or is connected differently than is shown | Connections → New devices/modifications) |
| in the connection diagram. | compare the connection diagram with the |
|
| actual installation and connect as illustrated |
|
| (page 40). |
| b) The AV standard is set incorrectly. | b) Set the correct standard (page 17). |
| c) The signal type is set incorrectly. | c) Set the correct signal type (page 41). |
|
| If for AV standard or AV signal is set to |
|
| "Automatic" then this can cause errors to |
|
| be detected with signals that do not |
|
| comply with standards. In this case |
|
| standard and signal must be set according |
|
| to the information in the operating manual |
|
| of the external device. |
|
|
|
The connection of a decoder does not | a) The signal is not decoded because the correct | a) Follow the instructions in the connection |
function or does not function properly. | decoder stations have not been selected in | wizard (TV menu → Connections → New |
| the connection wizard. | devices/modifications) and select the |
|
| appropriate decoder transmitter (page 40). |
|
| b) Follow the instructions in the connection |
| b) In decoder mode the sound is missing | wizard and select the right audio source |
| because the wrong decoder sound has been | (Decoder, TV oder Autom.) (page 40), see |
| assigned in the connection wizard. | also decoder instructions. |
|
|
|
|
|
|
57 -
33156_024_Xelos_A32_42_GB_9_00_B57 57
03.07.2008 15:39:56