3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 18
To quickly select a camera for single view display mode, click its corresponding
number. It also provides a simple way to check which cameras are recording.
Green: “Constant” recording mode and is recording
Blue: “Motion” recording mode and is recording (motion detected)
Red: “Motion Alarm” recording mode and is recording (motion detected). If POS
data alarms are configured, it can also mean a POS data alarm.
(motion currently not
Uncoloured: Camera is currently not recording, but is enabled
Disabled: Camera is not recording and is disabled
Yellow: Set to a motion recording mode and is recording
detected and will stop after the “Post Motion Record” time has elapsed)
1.2.8 Alarms and Relays ss with USB digital I/O boards. Please see the contact
formation at the end of this guide if you are interested in obtaining these devices.
Input alarms can trigger recording of video and/or audio based on an externally tripped circuit. Output relays
can be triggered by motion alarms, video loss, POS data, or failure of the DVR.
More information on configur g these devices can be found in the “Settings” section.
Depending on the hardware installed with your DVR unit, you may have access to digital inputs and outputs
that can be configured as input alarms or output relays. The number of available alarms and relays is
ependent on your hardware, but is nearly limitled
in
in
Opens the corresponding window, “Live Alarms” or “Relays”.
To assist in wiring alarms an
the frame titles on the alarms and relays windows.
d relays, the hardware locations of the digital inputs and outputs are indicated by
The “Live Alarms” window indicates configured input alarms.
Green: Alarm input is enabled
Red: Alarm input is triggered
The “Relays” window indicates configured output relays and allows manual
control of relays.
Green: Output relay is enabled and configured
Red: Output relay is triggered
You can manually turn on/off some relays by clicking on their respective button.
The 4th relay has been set to stay closed while the application is open and
cannot be turned off manually.