Destination Path Select the hard drive partition you want to use to record video data to.
Export Destinations 2.3.3
When an export destination is added or edited, the “Media Control” window is displayed. Video Still/Motion
Export Destinations are used to store exported video footage. You must set up destinations before saving
video footage or still images.
Destination
Name A name for the destination to appear in Vigil Server.
Destination
Path Enter a path for the destination or click the “…” button to browse to a folder.
Destination
Type
This setting affects how the destination appears in the selection list. Choose from:
• Default On – By default, the destination checkbox will be selected.
• Default Off – By default, the destination checkbox will not be selected.
• Silent Send – All exports are also sent to this destination without notifying the user.
Include DV
Player
Saves the DV Player (Digital Video Player) to the destination as well as the video, each time
video footage is exported to this destination. This setting is normally used for CD-R or
DVD-R media type destinations.
2.4 COM Ports Tab
The COM Ports Settings tab configures the installed COM ports for communication with connected hardware
such POS data terminals and camera control.
Select the desired “COM Port” from the drop-down box and adjust the “Baud Rate”, “Data Bits”, “Stop Bits”,
and “Parity” to match that of the connected hardware such as POS data registers or camera controls.
3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 95