Lopi 1750 owner manual Standard Ceiling with a Factory Built Chimney

Standard Ceiling with a Factory Built Chimney

Stove Installation (for qualified installers only)				15
Chimney Cap
(See the section "Chimney
Termination Requirements"		}	Follow the chimney
for more			manufacturer's instructions
			and clearances for roof
			penetrations. A storm collar
Chimney Sections			and flashing are required
			(some require a radiation
Insulation	}		shield).
Follow the chimney
manufacturer's instructions			Minimum Air Space to
and clearances for floor			Combustibles (See
penetrations. A ceiling			Chimney Manufacturer's
support is required, an attic			Instructions - usually 2")
insulation shield is required
where insulation is present.
Chimney Connector Sections			Minimum 15'
			Maximum 33'
Floor Protection			Stove Clearances
(See the section "Floor
			(See the section "Stove
Protection Requirements"
			Placement Requirements"
for more details)
			for more details)

Figure 11

Cathedral Ceiling with a Factory Built Chimney

Chimney Cap (See the section "Chimney

Termination Requirements" for more details)

Chimney Sections }

Minimum Air Space to Combustibles (See Chimney Manufacturer's Instructions - usually 2")

Chimney

Connector

Sections

Floor Protection

(See the section "Floor Protection Requirements" for more details)

Follow the chimney manufacturer's instructions and clearances for roof penetrations. A storm collar, flashing, and cathedral-style chimney support are required (some require a radiation shield).

Minimum 15'

Maximum 33'

Stove Clearances (See the section "Stove Placement Requirements" for more details)

Figure 12

© Travis Industries 100-01179 4060926