Tracking | Lorex 27[sy] LED monitor guide

Using the Menu

5.3 Tracking

When the monitor is connected using VGA, press + to move the screen display area to the right or - to move left.

When the monitor is connected using VGA, press + to move the screen display area up or - to move down.

Clock

Press +/- to adjust the Clock setting.

Phase

Press +/- to adjust the Phase setting.

Sharpness

Press +/- to adjust the display sharpness.

Sharpness can be adjusted from 0 to 10.

Press UP and DOWN to select the language used in the Menu. The language updates immediately when selected.

OSD Position - Horizontal

Press + to move the Menu to the right or - to move left.

OSD Position - Vertical

Press + to move the Menu up or - to move down.

White Balance

Press +/- to turn the White Balance setting on or off.

Press +/- to turn the Dynamic Contrast Ratio setting on or off.

4:3 or Wide

Press +/- to select a widescreen or 4:3 aspect ratio.

Input Select

Press +/- to select HDMI or VGA inputs.

Press + or - to reset the monitor to factory default settings. The settings change immediately.