(VI) SET BY DAY: Set the scheduled recording time by the selected day. You can program up to 30 scheduled recordings. Under the
Example: 01 2005 04/01 22:40 09:10 ADD This means that recording will take place on April.1, 2005 at 10:40 pm to April.2, 2005 to 7:50 am for 9 hours and 10 minutes
•After setting the DAY, choose ADD and press the SELECT button
Note: HH is based on a 24 hour clock
3.SENSOR/ALARM
This submenu allows you to configure the recording parameters under the Alarm condition.
(i)BUZZER: Select the buzzer ON or OFF when the alarm is activated
(ii)ALARM RECORD DURATION: Selects how long the DVR will automatically record after an alarm is triggered. Available duration times are: OFF, 05, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 90, 120, 150, 180, 210 AND 240 seconds
| YEAR MM / DD HH MM RECORD TIME | |||||
O1 | 20 .. | .. | / .. | .. | : | .. |
02 | 20 .. | .. | / .. | .. | : | .. |
03 | 20 .. | .. | / .. | .. | : | .. |
04 | 20 .. | .. | / .. | .. | : | .. |
05 | 20 .. | .. | / .. | .. | : | .. |
06 | 20 .. | .. | / .. | .. | : | .. |
07 | 20 .. | .. | / .. | .. | : | .. |
08 | 20 .. | .. | / .. | .. | : | .. |
09 | 20 .. | .. | / .. | .. | : | .. |
10 | 20 .. | .. | / .. | .. | : | .. |
PRESS ( cd), THEN (SELECT)
PRESS (MENU) TO EXIT
SENSOR / ALARM
BUZZER | ON |
ALARM RECORD DURATION | 10 |
ALARM OUTPUT DURATION | OFF |
ALARM INPUT: |
|
CAMERA 1 | OFF |
CAMERA 2 | OFF |
CAMERA 3 | OFF |
CAMERA 4 | OFF |
PRESS ( cd), THEN (SELECT)
PRESS (MENU) TO EXIT
(iii)ALARM OUTPUT DURATION: Selects how long the DVR will automatically record after
an output alarm is triggered. Available duration times are: OFF, CONT, 05, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 90, 120, 150, 180, 210 AND 240 seconds
(iv)ALARM INPUT: Select the type of alarm input for each camera, OFF, N/O (Normally Open) or N/C (Normally Closed). The alarm inputs are set up at the back of the DVR, labelled “SEN1 – SEN4” (Sensor 1 – Sensor 4)
4.RECORD SETTING
This submenu allows you to set the Record parameters for your Hard Disk Drive. Use this section to configure your record settings. The selected FPS and Quality will determine how long the DVR will record for. Use the chart in Appendix #2 to select the appropriate settings
(i)RECORD MODE: Set to record a Full Screen or Quad screen
(ii)RECORD QUALITY: Sets the quality level of
recording. Available settings are: NORMAL,
HIGH, LOW. The default setting is: NORMAL.
RECORD SETTING |
|
RECORD MODE | EACH |
RECORD QUALITY | NORMAL |
RECORD FPS | 30 |
RECORD CAM 1 | OFF |
RECORDCAM 2 | OFF |
RECORDCAM 3 | OFF |
RECORDCAM 4 | OFF |
PRESS ( cd), THEN (SELECT)
PRESS (MENU) TO EXIT
