Network Connectivity
Network Connectivity
The L284161 DVR can be remotely controlled using your existing network and the provided NetViewer software.
1.Connect the DVR to the Router using the supplied Ethernet Cable. Power the Observation unit on.
NOTE: The DVR must be connected to the router prior to powering on the system. This allows the system to communicate on your network
2.Set up a web account at http:// dips.dipserv.com/. Refer to the NetViewer Manual for setup and configuration instructions.
3.Install the NetViewer software on your PC. Refer to the provided ‘NetViewer Guide’ with your product for details on using the software.
4.Find the IP address of your Observation using the Lorex IPEdit application. See Page 36 for details
5.Enable PORT FORWARDING on your Router. Refer to the instructions on Page 37 for details.
DVR
INTERNET
ROUTER
(Not Included)
PC
(Not Included)
34
