Connecting The Camera
Wireless Receiver Setup
To connect a wireless receiver to a surveillance recorder (DVR):
1Connect the BNC connector on the receiver directly into an available video input.
Make sure to first connect and power on the camera(s) before poweringonthereceiver;thiswill ensure a proper connection.
NOTE: Ifnecessary,attachthe 3ft(1m)BNC/BNC extensioncableat oneend to thereceiver and at the other end to the surveillance recorder.
2Connect the power cable from the receiver to the power adapter. Plug the power adapter into an outlet or surge protector.
NOTE: For instructions on powering multiple receivers, see “Powering Multiple Receivers Using The Power Splitter Cable (LW2110PK2 only)” on page 7.
To connect the wireless receiver to a TV or VCR:
1Attach the included BNC/RCA adapter to the BNC connector on the receiver and plug the receiver directly into an available video input on the TV or VCR.
Rear panel of TV.
BNC extension cable
Receiver
Connect the BNC connector to the BNC to RCA adapter (included).
Make sure to first connect and power on the camera(s) before poweringonthereceiver;thiswill ensure a proper connection.
NOTE: If necessary, attach one end of the 3ft (1m) BNC/BNC extension cable tothe receiver and at the other end attach the BNC/RCA adapter, then connect the BNC/RCA adapter to the viewing/recording device.
2Connect the power cable from the receiver to the cable of the power adapter. Plug the power adapter into a local AC power outlet or surge protector.
5
