Pub. 988-0154-371

EP-15 Fluid Level

Electronic Sensor

Installation Instructions

This instruction sheet tells how to install your EP-15 Fluid Level sensor and connect it to a NMEA 2000network using LowranceNET network components. You must refer to your digital gauge, sonar or GPS unit's manual for sensor operation instructions.

Caution:

Installing LowranceNET NMEA 2000 devices is significantly different from installing earlier Lowrance components without NMEA 2000 features. You should read all of the installation instructions before proceeding. You should decide where to install all components before drilling any holes in your vessel.

Some sonar or GPS units may require a software upgrade to display NMEA 2000 data correctly and a manual addendum describing how to operate the sensor. You can download these free and get additional information on the NMEA 2000compatible LowranceNET system at our web site, www.lowrance.com.

All Lowrance NMEA 2000 capable devices are either NMEA 2000 certified or certification is pending. See our web site for the latest product status information.

Smart module

Blue female NMEA 2000 connector

Sending unit connections: red lead and black lead.

The EP-15 Fluid Level sensor.

1

Page 1
Image 1
Lowrance electronic installation instructions EP-15 Fluid Level, Installation Instructions