107.5
[4.23]
82.7
[3.26]
156 |
[6.26] |
12.09 [0.48] |
76.9
[3.03]
Millimeter
[Inch]
70.3
[2.77]
Front view (left) and side view (right) showing dimensions of the X47
when mounted on quick release bracket.
If you wish, you can fill in the hole around the cable with a good marine caulking compound. (Some marine dealers stock cable hole covers to conceal the opening.) No matter what type of installation you prefer, be sure to leave enough slack in the cable to allow tilting or swiveling the unit.
For the X47EX
If you choose to fill in the cable hole, be sure to position the cable against the rear edge of the hole as you apply the fill material.
Before positioning the gimbal bracket, be sure to hold the cable against the rear edge of the hole. Then, slide the bracket over the hole and butt the rear of the bracket base firmly against the cable, thus pinning it in place against the side of the hole. Finally, fasten the bracket to the dash.
Front
Install the gimbal bracket. Orient the bracket so the arms slope toward
the front of your unit.
18
