pc

10.25 pc 11.25 pc

38

34.5 pc

Chapter 2

Installing the LSIU160

This chapter provides instructions on how to install the LSIU160 and includes these topics:

•Section 2.1, “Quick Installation Procedure,” page 2-1

•Section 2.2, “Detailed Installation Procedure,” page 2-3

•Section 2.3, “Completing the Installation,” page 2-24

2.1Quick Installation Procedure

This section provides an overview of the installation procedure. If you are an experienced computer user with prior host adapter installation and SCSI bus setup experience, this section may sufficiently describe the procedure for you. If you prefer a more detailed guidance for installing the LSIU160, proceed to Section 2.2, “Detailed Installation Procedure.”

pc

For safe and proper installation, check the user’s manual supplied with your computer and perform the following steps.

Step 1. Ground yourself before removing this host adapter board.

Step 2. Remove the LSIU160 from the packing and check that it is not damaged.

An example of this host adapter board is shown in Figure 2.1.

A more detailed drawing is located in Figure A.1.

Step 3. Switch off and unplug the system.

Step 4. Remove the cabinet cover on your computer to access the PCI slots.

Caution: Ground yourself by touching a metal surface before handling boards. Static charges on your body can damage electronic components. Handle plug-in boards by the edge;

LSIU160 PCI to Single Channel Ultra160 SCSI Host Adapter

2-1