pc

10.25 pc 11.25 pc

38

34.5pc

2.2.5Making External SCSI Bus Connections

This section provides step-by-step instructions about making external

SCSI bus connections. To connect external SCSI devices to the

LSIU160:

Step 1. Plug the 68-pin HD connector on one end of a shielded external SCSI cable (see Figure 2.3) into the host adapter connector J3 (see Figure 2.1).

This connector is in the bracket attached to the back panel of your computer. Figure 2.9 shows how this connection is made.

Figure 2.9 External Cable to Host Adapter

pc

HD Connector

Detailed Installation Procedure

2-15