LSI U160 2.2.4Making Internal SCSI Bus Connections, Figure 2.4 Internal SCSI Ribbon Cable to Host Adapter Connection

pc 10.25 pc 11.25 pc 38

34.5pc

2.2.4Making Internal SCSI Bus Connections

This section provides step-by-step instructions about making internal

SCSI bus connections.

Step 1. Plug one end of the 68-pin internal SCSI ribbon cable into connector J4 (see Figure 2.4).

Important: You must match pin 1 on this and all subsequent connections.

Figure 2.4 Internal SCSI Ribbon Cable to Host Adapter Connection

pc

Internal

SCSI Interface

J4

2-10 Installing the LSIU160