pc

10.25 pc 11.25 pc

38

34.5 pc

you start the Configuration Menu. The subordinate menus are listed below.

•Adapter properties

•Device properties

•Adapter boot list

•Global properties

All these properties are controlled by menus you access through the configuration utility Main Menu. The Main Menu also gives an overview of some properties of installed LSI Logic host adapter boards.

3.1.1Starting the Configuration Utility

pc

You can see the version number of your LSI Logic SCSI BIOS in a banner displayed on your computer monitor during boot. If the utility is available, the following message also appears on your monitor:

Press Ctrl-C to start LSI Logic Configuration Utility...

This message remains on your screen for about five seconds, giving you time to start the utility. If you press “Ctrl-C,” the message changes to:

Please wait, invoking LSI Logic Configuration Utility...

After a brief pause, your computer monitor displays the Main Menu of the LSI Logic SCSI BIOS Configuration Utility.

These messages may appear during the boot process:

•“Adapter removed from boot order, parameters will be updated accordingly” appears when an adapter is removed from the system or relocated behind a PCI bridge.

•“Configuration data invalid, saving default configuration!” appears if none of the information in the NVRAM is valid.

•“Found SCSI Controller not in following Boot Order List, to Add: Press Ctrl-C to start LSI Logic Configuration Utility...” appears when less than four adapters are in the boot order and more adapters exist than are shown.

3-2

Configuring the LSIU160