pc | 10.25 pc 11.25 pc | 38 |
34.5 pc
If you have more than one internal device to connect, use an internal SCSI ribbon cable with the required number of connectors attached along its length and proceed to the next step. An example of this type of connection is provided in Figure 2.6. If you have only one internal device, proceed to Step 4 on page
Step 3. Plug the cable into each additional device as needed.
An example of this type of chained connection is shown in
Figure 2.7. Make sure to match pin 1 on all connections.
Figure 2.6 Connecting Additional Internal SCSI Devicespc
Installing the LSIU160 |