Luce PT-L6600E, PT-L6510E manual Adjusting the picture

Adjusting the picture

1.Obtain the MENU window and select (highlight) the desired option item with the or buttons.

2.Adjust the parameter value with the or

buttons. For items requiring a separate

bar graph, first display the bar graph with

the “ENTER” or / buttons, then adjust the parameter value with the or buttons.

• For RGB/YPBPR/DVI signals

	PICTURE
PICTURE MODE		NATURAL
COLOUR		32
BRIGHT		32
CONTRAST		32
SHARPNESS		00
W-BAL R		32
W-BAL G		32
W-BAL B		32
SIGNAL MODE		XGA
STANDARD
SELECT	ADJ	ESC

• For composite or S-video signals

	PICTURE
PICTURE MODE		NATURAL
COLOUR		32
TINT		32
BRIGHT		32
CONTRAST		32
SHARPNESS		08
TV-SYSTEM		AUTO1
STANDARD
SELECT	ADJ	ESC

PICTURE MODE

The picture mode can be selected from the following depending on viewing conditions and the video signal source in use:

PICTURE MODE NATURAL

DYNAMIC

NATURAL: Picture brightness/contrast ratio is adjusted to that suitable for projection image viewing under typical location conditions.

DYNAMIC: Picture brightness/contrast ratio is increased to suit brighter viewing environments.

COLOUR

(Valid for composite/S-video/YPBPRsignals only)

button: Deepens colours. button: Weakens colours.

TINT

(Valid for NTSC / NTSC4.43 standard) “TINT” is used to adjust human skin.

button: Adjusts skin tone toward greenish colour. button: Adjusts skin tone toward reddish-purple.

Note

•PT-L6600E is able to adjust the tint level at YPBPR input mode.

BRIGHT

“BRIGHT” is used to adjust the black level (brightness).

button: Raises the picture brightness. button: Lowers the picture brightness.

CONTRAST

“CONTRAST” is used to adjust the contrast ratio.

button: Raises the contrast ratio. button: Lowers the contrast ratio.

SHARPNESS

(Valid for composite/RGB/YPBPR signals only for PT- L6510E)

(Valid for composite/YPBPR signals only for PT- L6600E)

“SHARPNESS” is used to adjust the crispness of the image.

button: Sharpens the edge of the image. button: Softens the edge of the image.

30