Lucent Technologies 03.0.042.2 manual Change Descriptions, Issue 1 July 2000

Change Descriptions

43.The administration field used to administer a user-translated version of the display message viewed when you use the button view feature on the DID-view button was located on the display-messagesproperty-managementform. The field is now located on the display-messagesview-buttonsform. Only the first 24 characters of the user-translated button view display message for the DID-view button are retained. The last 16 characters are truncated.

44.When displaying the contents of an autodial button with a Button View button, special characters such as "pause" did not display correctly. In addition, characters following a "suppress special" character did not suppress in the button view display.

45.A station with a manual exclusion soft key administered beeped when calling a busy destination.

46.A user calling a DECT unit that was not reachable had to wait for the full "doesn’t answer" timeout before covering or forwarding, rather than covering or forwarding as soon as the unit was determined to be unreachable.

47.Under heavy traffic load, if numerous (50 or more) stations went off-hook at about the same time (10 second window) and were directed to the attendant via the Emergency Access feature the system might reset.

48.Automatic Route Selection (ARS) calls that were administered to route immediately were incorrectly delayed by a 3 second inter-digit timer.

49.With Centralized Voice Mail via Interswitch Mode Code, if the switch did not have a Uniform Dial Plan (UDP) then the proper digits were not being delivered to the Voice Mail System (VMS) (AUDIX or OCTEL) for internal and external coverage calls. The proper digits are now delivered to the VMS even if UDP is not enabled. The only difference is in the mode code that is sent. If UDP is enabled then the mode codes #02 or #03 are sent. If UDP is not enabled then only the mode code #03 is sent.

50.Calls to Computer Telephony Integration (CTI) type stations did not go to coverage when Send All Calls (SAC) was activated.

51.When Trunk Answer Any Station (TAAS) was used outside of night service on attendant vectored calls, the calls were not dropped from the attendant queue.

52.Trying to remove an AWOH station with a Ringer Cutoff button active failed; this failure happened only if Terminal Translation Initialization (TTI) was NOT enabled in the system.

53.Calls to a VDN that terminated to an attendant split displayed the wrong information on the console if the vector had an announcement step prior to queueing the call to the split.

54.It was possible to remove a hunt group, even if its extension was administered as the “VMS Hunt Group Extension” on the system-parammode-codeform. Also, the command "list usage extension” did not show the hunt group extension, as used on the mode-code form.

Issue 1 July 2000 9