Lucent Technologies 03.0.042.2 manual have been changed to, Change Descriptions, Issue 1 July

Change Descriptions

3)The Maximum allowed IP SoftPhones was controlled via the “Maximum IP SoftPhones” field on the system-parameterscustomer-optionsform.

have been changed to:

1)It is possible to list all administered IP SoftPhones using the “list multimedia ip-station” command.

2)Access to the “list multimedia ip-stations” command is blocked using the “mm-ip-stations” keyword on the permissions form.

3)The Maximum allowed IP SoftPhones is controlled via the “Maximum IP Stations” field on the system-parameters customer-options form.

20.If the board/port assigned to the attendant console was busied/released by maintenance and a trunk group was under attendant control (ACTGA), the control lamp for the Direct Trunk Group Select (DTGS) button cleared, but the trunk group was still under control of the attendant.

21.The bridged appearance button(s) on AWOH stations were not updated to the current call state when the station was associated to a port.

22.Attendant extended calls to a Do Not Disturb (DND) station connected the attendant to the busy tone, even though the system was administered to direct the call to the attendant group; in addition the system blocked post activation of the priority calling feature. For the call scenario described above the call will now be directed to the attendant group, which will allow the attendant to aciviate the priority button to override the restriction and ring the station.

23.If a call came into a VDN, followed the vector, and then was queued, but the caller hung up before an agent answered, the queue call lamps of the BRI set continued to flash with no calls in queue.

24.The conversion of AAR/ARS routing tables was incorrect for some configurations when upgrading to R7/R8.

25.A user was unable to login as an ACD agent from a DECT handset.

26.When the Answer Detection by Call Classification feature was activated on an outgoing Wide Area Telephone Service (WATS) trunk type personal Central Office (CO) line, the call failed to reach the intended destination because some digits were outpulsed twice.

27.Touch-Tone Receiver (TTR) queue processing could cause a system reset.

28.If a Telecommuter’s voice link was a trunk without answer supervision, after the answer supervision time out, the IP SoftPhone automatically answered the call. The user must now answer both IP SoftPhone and voice link to get the call for trunks without answer supervision.

29.Users tracing a call with the "list-trace-sta/tac" command that resulted in a “denial ...” message (caller connected to reorder or intercept tone) had to execute the "display-event-denial" command to display the event description. The denial event description is now displayed in the trace output following the denial message.

Issue 1 July 2000 7