Lucent Technologies iv , , ,

CALLMASTER®

Raising or Lowering Receive Volume

You can use the Volume control button to raise and lower the receive level

volume under the following conditions:

•The CALLMASTER IV voice terminal is off-hook, and the headset(s) is

plugged in.

•The voice terminal is

not

off-hook on an external speakerphone call.

•No call is ringing.

•You are

not

in the midst of selecting a personalized ringing pattern.

To raise or lower the receive volume

•To raise the volume of the receive level of the headset or the handset,

press the right volume control button labeled .

•To lower the receive level of the headset or the handset,

press the left volume control button labeled .

NOTE: There are eight possible volume settings. Each press of the volume

control button raises or lowers the volume one incremental level.

As you raise or lower the headset volume level, the display reflects your

choice, such as:

On the display, one arrow is the lowest setting, and eight arrows is the highest

setting.

NOTE: For procedures to raise and lower the ringer volume on your

CALLMASTER IV set, see the procedures for the Select Ring feature later in

this section.

Disconnecting from Calls

•Press to disconnect from any type of call. This method is faster

than waiting for a caller or trunk to disconnect and enables you to perform

other ACD or voice terminal procedures sooner. You do not hear dial tone

after you press .

•Press which disconnects you from a call and gives you dial tone.

Use when you want to disconnect from an ACD or non-ACD call

and place another call.

Headset L >>>>> H

Release

Drop

Test

Drop

Test