CALLMASTER®
IV Voice Terminal User and Installation Instructions
17
Testing the Headset or Handset
NOTE: If you are using a handset, use the installation instructions that come
with the handset kit to install the handset cradle.
1Plug in the headset or the handset, press a call appearance button, and
listen for dial tone.
•If you do not hear dial tone, press another call appearance button.
You may also want to check that the cords are connected securely
at both ends.
Labeling and Installing the Button-Designation
Cards and Covers
NOTE: The cards and covers are shipped as loose items with the
CALLMASTER IV voice terminal.
1Make sure that the voice terminal is right side up.
2Type or write the numbers/features on the button designation cards with
the appropriate button information.See Figure 6.
3Crease the perforated edges of the button designation cards and then
remove the cards.
4If the clear plastic card cover has already been installed o n the voice
terminal, remove the cover on the right side of the CALLMASTER IV by
gently lifting the plastic cover, with your fingernail, at the slot on the right
of the set (for the card on the right).
If the plastic card cover has not been previously installed on your
CALLMASTER IV, go on to the next step.
NOTE: If you need to remove the clear card cover on the left side of the set,
gently lift the plastic cover, with your fingernail, at the slot on the left of the set.