Lucent Technologies MLX-10, MLX-5 manual ÊLast Number DialÊ, Night ServiceÊ, ÊPagingÊ

Models: MLX-5 MLX-10

1 22
Download 22 pages 45.95 Kb
Page 16
Image 16

Often-Used Features

ÊLast Number DialÊ

To program:

See Programming Buttons & Settings, p. 17.

This feature automatically redials the last number you called. You should program Last Number Dial on a button.

To use:

1.Press the same type of line button used to place the first call (for example, ICOM or SA).

2.Press the programmed Last Number Dial button,

OR

Press the Feature button and dial 84.

ÊNight ServiceÊ

Your company may use Night Service to treat calls differently after hours. If Night Service is on, you may not be able to make outside calls, or you may need a password to do so. See your system manager for a password and/or emergency numbers you can dial without a password.

To make an outside call and override Night Service, press the Hold button and dial the password. Then lift the handset or press the Speaker button and dial the call.

ÊPagingÊ

To program:

See Programming Buttons & Settings, p. 17.

You can page an individual at his or her phone by using an ICOM Voice or SA Voice button (see Line Buttons, p. 1). Or you may be able to page all speakerphones or groups of speakerphones, depending upon how your system is set up. If your company has a loudspeaker paging system, use it to page the whole company or just people in a certain zone.

To program or use Speakerphone Paging, check with your system manager for Group Paging or Page All numbers, then:

1.Press any ICOM or SA button and lift the handset.

2.Dial a Group Paging or Page All number,

OR

Press the button you programmed for Group Paging or Page All.

3.After the beep, make the announcement and hang up.

Ask your system manager whether Loudspeaker Paging is available and if there is a list of paging zones. To use:

1.Press any ICOM or SA button and lift the handset.

2.Press the Feature button, dial 9 and the loudspeaker paging line number, plus the zone if necessary.

3.Make the announcement and hang up. To use when a button is programmed:

1.Lift the handset, press the programmed button, and dial the zone, if necessary.

2.Make the announcement and hang up.

14

Page 16
Image 16
Lucent Technologies MLX-10 ÊLast Number DialÊ, Night ServiceÊ, ÊPagingÊ, Press any Icom or SA button and lift the handset