Conversion Instructions
6.Reconnect any lines that you have removed.
7.Reconnect the monitor and keyboard.
8.Reconnect the power cords.
9.Apply power to the system and watch the monitor.
The system responds with a series of memory checks followed by the statement:
Press <ESC> to Enter Setup After Memory Test
10.Continue with Task 8, “"Allow the System to Finish Booting" on page
MAP/100 Instructions
For additional information about the MAP/100, see INTUITY MAP/100 Hardware Installation,
MAP/100: Open the MAP
1.Remove the incoming AC power cord, keyboard, and video cord.
2.Tag the power cord plugs with a note indicating that nobody other than yourself should reconnect power to this equipment.
3.In one corner of the top dress cover, place your fingertips in the space between the bottom of the top cover and the top of the side cover. Gently pry off the dress cover by applying upward pressure at each corner.
4.Place your fingertips at the top of the
5.Loosen the eight
Issue 1 June 2000